Damp Survey

Guide · Homeowners · 4 min read · Updated 17 November 2026

How to Read a Damp Survey Report (and Spot a Bad One)

Short answer

A good damp survey report states what type of damp is present, shows the evidence such as readings, photos and test results, explains the cause, and lists repairs in a logical order from the simplest fix upwards. Warning signs include no outside inspection, meter readings used as proof of rising damp, no mention of ventilation or leaks, and an immediate recommendation for chemical injection.

How to Read a Damp Survey Report (and Spot a Bad One)

The main parts of a report

Reports vary in layout but most follow the same structure. There is a summary of the instructions and weather at the time of the visit, a description of the building, then findings room by room or wall by wall, and finally recommendations. Longer reports include appendices with test results, moisture profiles and annotated photographs.

Read the summary and recommendations first, then check that the findings section actually supports them. The link between evidence and conclusion is what separates a useful report from a sales letter.

Most reports also include a short section on limitations. This lists anything the surveyor could not inspect, such as rooms that were locked, floors covered by fitted carpet or walls hidden behind kitchen units. Read it carefully, because a problem in an area that was not inspected is not covered by the conclusions of the report.

Note the weather recorded at the time of the visit. A survey carried out after a week of heavy rain may show penetrating damp that is hard to see in a dry spell, and the surveyor should allow for that in their interpretation.

  • Scope, date, weather and access limitations
  • Construction type: solid or cavity walls, floor type, age
  • Findings for each affected area with readings and photos
  • Diagnosis: type of damp and its cause
  • Recommendations in priority order

Understanding moisture readings

Electrical meter readings are usually shown as a number on a relative scale or as wood moisture equivalent. On masonry these are comparative only. They show where a wall is wetter than elsewhere, not how much water it holds. A report that says a wall has rising damp because it read high on a meter has not proved anything.

Carbide readings and salt analysis are stronger evidence. Carbide tests give the actual moisture content of drilled samples. Salt analysis shows whether chlorides and nitrates, which come from groundwater, are present. A profile that is wettest at the base and drier with height, combined with ground salts, points to rising damp.

Humidity data deserves a careful look too. A report that records relative humidity, air temperature and surface temperature in each room lets you see whether condensation is likely, and gives a baseline to compare against once ventilation has been improved.

EvidenceStrengthWhat it suggests
Meter readings onlyWeakWhere to investigate further
Readings plus outside defect photosModerateLikely penetrating damp or bridging
Humidity and surface temperature dataModerate to strongCondensation risk
Carbide profile at several heightsStrongReal moisture content in masonry
Carbide plus ground salt analysisStrongSupports a rising damp diagnosis

Judging the recommendations

Recommendations should start with the cause. If the outside ground is above the damp course, the first step is lowering it. If gutters overflow, repair them. If humidity is high, improve extraction and heating. Treatment to the wall itself only makes sense once those causes are dealt with, or where testing shows a failed or missing damp course.

For older solid-walled homes, look for advice that respects breathable construction, such as lime plaster and removing cement render, rather than defaulting to cement-based replastering and waterproof coatings.

Check that each recommendation has a clear reason attached to it. A useful report says, for example, that the outside path is 50 mm above the damp course and should be lowered to 150 mm below it, rather than simply listing damp-proofing works. Specific measurements and locations also make it easier for contractors to quote accurately and for you to check the finished work.

Red flags in a damp report

Be cautious about any report that skips the outside of the building, or recommends a damp course for an upstairs wall. Rising damp cannot climb to first-floor level. Equally, a report that blames every damp patch on one cause without discussing others is unlikely to be thorough. Vague phrases like damp present throughout, with no readings, map or photos, give you nothing to check.

Another red flag is pressure to sign up quickly, such as a discount that expires within days. Genuine damp problems develop over months and years, so a few more days to get a second opinion will not make a meaningful difference to the building.

  • No external inspection recorded
  • Rising damp diagnosed from meter readings alone
  • Damp course recommended above ground floor
  • No mention of ventilation, condensation or leaks
  • Recommendations that match a price list rather than the findings

What to do next

If the report is clear and evidence-based, use it to get quotes from the relevant trades, whether that is a roofer, a plasterer or a damp specialist. Give every contractor the same report so the quotes are comparable. If something in the report does not make sense, ask the surveyor to explain. A good surveyor will happily walk you through their reasoning.

If you have doubts, a second independent opinion is cheaper than treating the wrong problem.

Keep the report safely with your property records. It will be useful when you sell, when you claim on any guarantee and when a future surveyor wants to know what was found and done before.

Questions people also ask

What is a normal moisture reading for a wall?

There is no single normal figure on an electrical meter, because readings on masonry are relative and affected by salts and finishes. Surveyors compare readings across a wall and at different heights. For a reliable figure, carbide testing measures actual moisture content, which the surveyor can interpret against the type of masonry.

Can I challenge a damp survey report?

Yes. Ask the surveyor to explain how they reached each conclusion and what testing supports it. If the report came from a treatment company, you can commission an independent survey for comparison. Where a paid surveyor has clearly been negligent, a complaint to their professional body may be appropriate.

Why does my report mention condensation when I have a tide mark?

Tide marks can form for several reasons, including salts from old damp, cold wall bases and condensation behind furniture. If humidity readings and surface temperatures show surfaces dropping below the dew point, condensation may be a large part of the problem even where an older damp source once existed.

Written and checked by the Damp Survey team. Read our editorial policy.

Get a free damp survey quote

Tell us what you need and we'll come back with a clear price.

Request a quote